braco-logo
tuv-certifed
udyog-setu-service
 
 
 
   
 
 
Products
 
 
Terminals / Lugs
Glands & Accessories
Crimping Tools
Export Item
Tailor Made
Glands & Accessories
Gland Selection
   
Single Compression Brass Cable Glands
Braco single compression Brass Cable Glands are suitable for armoured / unarmoured cables. These are manufactured out of brass castings and are machined accurately to the required sizes These glands are nickel plated to avoid corrosion while storage and use.
   
 
Double Compression Brass Cable Glands
Braco Double Compression glands are manufactured out of brass rods/castings and are machined accurately to the required sizes. These are nickel plated to avoid corrosion whilst storage and use.
   
 
Flange Type Brass Cable Glands
Braco Flange Type Cable Glands are made out of brass castings and are machined accurately to the required sizes. These glands are suitable for armoured calbes and are called mechanical glands hence suitable for outdoor application.
   
 
BW Type Brass Glands
Braco BW Cable glands are as per BS 6121 Part 1:1989 and suitable for singel wire armoured plastic or rubber sheathed cables. These glands provide mechanical cable retention, and electrical continuity via armour wire ttermination. the use of these glands is recommended in dry, indoor situations. Shrouds may be used for ingress protection.
   
 
CW Type Brass Glands
Braco CW Brass cable glands are as per BS 6121 Part 1:1989 and suitable for single wire armoured plastic or rubber sheathed cables. The outer seal grips sheath. These glands provide mechanical cable retention, and electrical continuity via armour wire termination. The use of these glands is recommended in indoor as well as outdoor application because of suitability in most climatic conditions weather proof and water proof.
   
 
A2 Type Brass Glands
Braco A2 type brass cable glands are as per BS 6121 Part 1:1989 and suitable for unarmoured, plastic or rubber sheathed cables. These glands provide outer seal joint and are suitable for indoor as well as outdoor applications.
   
 
Brass Earth Tags
Braco earth tags are made out of brass sheets and punched to the required sizes and are suitable for all sizes of cable glands. Electrical continuity is normally achieved via the screwed entry into metal boxes. For clearance hole entry situations it is essential to obtain direct metal-tometal contact between the gland, earth tag and the enclosure. These are used to ensure earth continuity between the gland and the equipment.
   
 
E1w Type Glands
Braco E1w type brass glands are as per BS 6121 part I : 1989 suitable for indoor as well as outdoor applications. These glands are suitable for all types of SWA cable, providing environmental seal on both the cable inner and outer sheaths.the glands also provide mechanical cable retention and electrical continuity via armour wire termination
   
 
PVC Shrouds
Braco black Polyvinyl chloride PVC shrouds are used for fitting over cable glands where additional protection against generous weather conditions and corrosion is required. They provide an effective seal onto both gland and cable oversheath as well as fast and simple installation. PVC shrouds also enhance the IP rating of a termination.
   
 
Gland Kits
Braco gland kits contain all that is necessary for terminating a cable run Gland(s), Earth tag(s), locknut(s) and shroud(s). Since the kits are ready to use hence are convenient and help to keep all parts for each termination together. The kits are easier to stock than loose pieces.
   
 
 
 
Industries Served
Electric Industry   Electronic
Railways   Steel
Cement   Textile
Chemical & Fertilizers   Automobile
Mining   Sugar
   
double-arrow Home
double-arrow About Us
double-arrow Products
double-arrow Clients
double-arrow Applications
double-arrow Contact Us
   
Phone : 91 - 22 - 39567543
E-mail : sales@braco.in
Download Our Catalogue pdf-icon
Download Our Price List pdf-icon
 
  Copyrights 2011 Braco Electricals